ZKTeco, FR1500-HID Flush-Mount Slave Fingerprint Reader

Description

ZKTeco, FR1500-HID, Flush-Mount Slave Fingerprint Reader with HID 125 kHz Card Reader
Features:
Sleek Stylish Form Factor:
Flush-mounted stainless steel enclosure with slim and attractive design is ideal for both indoor and outdoor installations where aesthetics are very important
Communication:
FR1500-ID connects only via RS485 to InBio and InBioPro panels. FR1500-ID does not support Wiegand.
Easy Operation:
Once a user places their finger on the FR1500-ID their fingerprint is subsequently matched by the InBio (or InBioPro) panel. FR1500-ID also provides Visual indication for acceptance / rejection of the fingerprint (and/or prox card) of the users.
Standard Reader:
SilkID fingerprint sensor. Built-in ZKAccess prox card reader.
FR1500-ID is a stylish single-gang flush-mounted slave fingerprint reader for inBio and inBio Pro panels, only. Reliable, durable and highly accurate FLUSH-MOUNT slave fingerprint reader, now with next generation SilkID sensor. FR1500-ID primarily connects with InBio panels. It also connects to stand-alone readers for doors needing both ingress and egress.
When users place their finger on the FR1500-ID SilkID fingerprint sensor, their fingerprint template is then transferred to the InBio panel via RS485 where it is matched and compared to an access control list on the InBio panel. The door will then open if the user has access rights. The entire process takes less than 1.5 seconds. FR1500-ID is also IP65-rated and ideal for outdoor applications.
Communication
RS485 only to InBio and InBioPro panels
Power
12V DC, 1A
Environment
Operating Temp: 14° to 113° F (-10° to 45° C)
Operating Humidity: 20% to 80%
Fingerprint sensor Technology
SilkID
Dimensions
Length: 4.8" (121.3 mm.)
Width: 3" (77.3 mm.)
Depth: .3" (7.1 mm.) exposed
1.5" (38 mm.) behind wall