-40%
ZKTeco C3-100 1 Door ID IC Card Reader Access Control TCP/IP. Zk USA Stock
$ 46.99
- Description
- Size Guide
Description
Super Fast Shipping !!!!ZK
TECO
C3-100
Introduction:
ZKAccess systems are built on flexible, open technology to provide management, real-time monitoring, and control of your access control system- all from a web browser. Simply download one instance of our free Windows-based v3.5 software (on a customer's computer or ZKAccess InBridge appliance) and then manage the software from any computer's web-browser which has administrative rights.
C3-100's versatile design features take care of present and future needs with ease and efficiency. It is one of the most rugged and reliable door controllers on the market, with a multitude of built-in features.
Be sure to inquire about ZKAccess options which can further reduce your C3 installation time and labor, including:
Features
- Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
- Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
-Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
- Easy-to-use and intuitive programming with ZKAccess Software
- System management by browser from client PC’s. No need to install software on each client
- Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
- Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
- Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
Specifications:
Model
C3-100
CPU
32bit MIPS CPU
RAM
32M bits
Flash Memory
256M bits
Number of door controller
1 door
Number of readers supported
1
User
30,000
Event Buffer
100,000
Power / Current
DC 9.6V-14.4V, Rated Max.1A
Reader Port
4ea (26bit Wiegand, 8bit Burst for PIN)
Communication
RS485, TCP/IP
Baud Rate
38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps (selectable)
Input Port
6ea (Exit Button#1, Exit Button#2, Door Sensor#1, Door Sensor#2, Aux#1, Aux#2)
Output Port
2ea (2 FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC)
2ea (2 Aux FORM-C Relay Output, SPDT 2A@30VDC)
LED Indicator
Yes, LED indication for communication, power, status and punch card
Operating Temperature
0°to +55°C
Operating Humidity
10% to 80% relative humidity non-condensing
Dimension (L*W)mm
160(W)*106(H)(single board )
Certification
CE, FCC