Rockford Fosgate RFPOL-RC5 Ride Command Harness

Description

Product highlights
connect a Power TM1000X5ad 5-channel amplifier to your Polaris Ride Command source unit
designed for Polaris RZR, Ranger, and General UTVs
works with Ride Command's built-in crossovers (high- and low-pass, 100 Hz)
includes custom wiring cables for both front/rear amp and subwoofer amp
includes remote-out to turn on your amplifiers
Element Ready design is made for life in the outdoors
warranty: 2 years
What's in the box
Polaris Ride Command interface (w/ attached 12" input harness / 5" output harness / 25" power&ground wires and 12" remote wire)
Instructions
About this item
Written by Crutchfield's Jon Paul
Amp up your Polaris Ride Command system
The RFPOL-RC34 Ride Command Audio Cable lets you connect a Rockford Fosgate 5-channel amplifier to the factory Polaris Ride Command receiver in your RZR, Ranger, or General UTV.
It's a two-part harness that taps both the front/rear signal and the subwoofer signal from the Ride Command radio and then sends signals to your Rockford Fosgate TM1000X5ad amplifier. It's designed to work with Ride Command's built-in crossovers, so you'll get the best sound possible. The entire assembly is Element Ready, so it'll stand up to dust, extreme temperatures, water, corrosion, vibration and UV rays.
Note:
Rockford Fosgate recommends using a using a +5 dB Gain Overlap on midrange/tweeters and +10 dB gain overlap on subwoofers when interfacing with the Ride Command source unit.