KnuKonceptz Kno Knoise Sound Deadening Bulk Pack 35sq ft 100mil thick Deadener

Description

Ebay Product Page
Store
About Us
Frequently Asked Questions
Policies
Shipping
Store Home
Amp Kits
Close Outs
Component Video Cables
Digital / Optical Cables
Distribution / Fuse Blocks
DVI & HDMI Cables
Fuses
Power Wire
RCA Cables
Sound Deadener
Speaker Wire
Subwoofer Cables
S-Video Cables
Terminals
Kno Knoise - Kolossus Edition 35sq ft
Kno Knoise is a constrained layer dampener, or what is now commonly abbreviated as a CLD. What is a CLD? A CLD is a material that adheres to panel to reduce resonant noise by using a viscoelastic polymer, in this case butyl rubber, sandwiched between two constraining walls to strengthen or "deaden" the outer wall. The outer aluminum backing reinforces the panel and reduces vibrations and rattles. It deadens the panel it is attached to, thus the name sound deadener. Kno Knoise quiets your vehicle's panels by stopping the vibrations that generate noise.
Kno Knoise Kolossus Edition uses the thickest aluminum top layer and butyl rubber in one package
. With a total thickness of 100mils and a nearly a pound per square foot, the Kolossus Edition lives up to its name! The Door Kit includes 20 sheets of Kno Knoise Kolossus Edition for a total of 35sq ft.
Specifications
Dampening Material:
Butyl Rubber
Total Thickness:
100mil (2.5mm)
Foil Thickness:
10mil
Weight:
0.93 lb/sq foot
Sheet size:
1.75sq ft (11" x 23")
# Sheets included:
20
Max Temperature Range:
-50F to 350F Meets FMVSS 302 standards for flammability
Operating Temperature Range:
10F to 130F
Overview:
Weighing in just under 1 pound per square foot and 100 mil thick, the Kolossus Edition controls extreme vibrations and quiets your vehicle.
Comparison:
Dynamat Xtreme Bulk Pack- 1.7mm thick / 4mil top layer foil / 36sq ft - 23 pounds shipping weight
Kno Knoise Kolossus Edition-
2.5mm thick / 10mil top layer foil / 35sq ft  - 34 pounds shipping weight
Product FAQ
This model is listed as a door kit, can I use it anywhere?
Yes! We offer our sound deadener in many different package sizes to target specific installation areas. The material is all the same, only the amount offered per package is different.
How do I install Kno Knoise sound deadener?
The butyl rubber is a sticky polymer, you simply clean the surface the sheet is to be applied onto, rubbing alcohol or similar cleaner is fine, peel the wax paper backing from Kno Knoise and place onto the panel. Use a rubber roller or your hand to firmly attach the deadener onto the vehicles panel.
Can I cut this material and with what?
Kno Knoise can be cut easily with a utility knife, scissors or tin snips to the shape of your panel
Additional Images