Hi Low RCA Line Output Converter +Built-in Remote Turn-On +Ground Loop Isolator

Description

Car Audio Audiophile 2-Channel High to Low RCA Converter + Built-in 12V Remote Amplifier Turn-On + Built-In Ground Loop isolator + LED indicator
You will NOT need to run a 12V remote turn-on wire from the radio to the amplifier!
YOU SPENT HUNDREDS EVEN THOUSANDS OF DOLLAR ON YOUR STEREO UPGRADE, DON'T SAVE A COUPLE OF BUCKS ON THIS VERY IMPORTANT AUDIO CONVERTER!!!
We recommend installing the Hi-Low converter as closed to the amplifier as possible in order to use the shortest 100% copper RCA cable possible and help avoid engine whine noise.
The HL-50R is a 2-channel high-level to low-level
Adjustable Signal Converter
designed for factory or aftermarket radios that do not have dedicated
RCA outputs
and
Remote 12V Turn-On output
.  The adapter converts high-level signal from the radio's speaker line and converts it into a low level RCA audio signal.  This allows you to add an amplifier to your system for higher power output and better sound quality. This converter also creates a turn-on 12V signal for your amplifier that may be missing from your stock factory radio, has a
built-in Ground Loop Isolator
and
LED Power Indicator
. All of this in a
Small Form Factor
Case!
Specifications:
2 Channel Input and Output
RCA Converter
Adjustable Input Signal Sensitivity
Built-in 12V Remote Turn-on Output
Built-in Ground Loop Isolator
LED Power Indicator
Frequency Response: 10Hz - 50kHz
Power Supply: 11-15V DC neg. ground
Max input: 50W
Input impedance: 15K ohms
THD: 0.03%
Dimensions: 2.75" x 1.7" x 1"  inches
"
Small Form Factor
"
The HL-50R is a major time saver when installing an amplifier to a source without RCA outputs or 12V turn-on output like a stock radio or aftermarket radio without RCA outputs.
You will NOT need to run a remote Turn-On wire from the front to that back of the car!
You run the power wire and ground to your amp like normal and then connect this to the power and remote turn on of your amplifier.
Here is how it works: The unit has a built in electronic relay, when your stock stereo sends sound to the speakers, this device converts the speaker out signal to High impedance level RCA outputs for your amplifier and at the same time, it feeds 12+ volts to the remote Turn-On wire of your amplifier.