-40%
DIFtech Brake Master Cylinder for 240SX w/ 300zx Calipers non-ABS S13 S14 10087
$ 84.48
- Description
- Size Guide
Description
DIF is proud to present a brake master cylinder upgrade for 240SX using 300ZX brake calipers. This Z32 master cylinder upgrade will provide proper brake bias for cars using Z32 calipers. It will move more fluid w/ less pressure allowing the master cylinder to move the 26mm or 30mm front 300ZX 4 piston calipers efficiently. Pedal feel will greatly improve giving the driver better pedal modulation. For the ultimate brake upgrade, use this BMC with an Automatic 240SX Brake Booster or a 300ZX Brake Booster, and all around 300ZX brakes with stainless steel brake lines.How does this BMC help? Here's how it works:
Since 4 piston calipers are more responsive and require
less
pressure to work efficiently, they will need a
bigger
BMC piston.
Small
piston diameter gives
more
pressure versus bigger piston diameter. If the calipers are forced with too much pressure, they will lock up too quickly giving the driver no room for modulation.
DIF sources only the highest quality master cylinders available and modifies them for proper non-ABS fitting configuration. The 17/16" (27mm) piston diameter was selected to give drivers the most responsive pedal feel for both street and track use.
NOTE:
All flared fittings are preinstalled for a reliable, leak free operation. This master cylinder is for non-ABS equiped cars requiring three fittings. Please take care to order the correct master cylinder for your application.
For
LEFT HAND DRIVE
vehicles only.
NOTE: Conversion to a Z32 master cylinder requires bending of the chassis hard brake lines or installation of a Z32 hard line conversion kit.
** Images shown may vary from actual product. **