-40%
Car Stereo AUX Adapter Audio Cable for 2004-2008 Ford F-150 Factory Stereo
Car Stereo AUX Adapter Audio Cable for 2004-2008 Ford F-150 Factory Stereo

Car Stereo AUX Adapter Audio Cable for 2004-2008 Ford F-150 Factory Stereo

$ 16.47

Availability: 62 in stock
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • MPN: i-3 and a-31-1
  • Condition: New
  • Brand: IMC Audio
  • Restocking Fee: No

    Description

    Car Stereo AUX Adapter Audio Cable for 2004-2008 Ford F-150 Factory Stereo
    Part Number:
    i-3 and a-31-1
    Description
    IMPORTANT NOTE
    - Radio MUST have AUX Button
    - Your radio must be RSE capable, but the Ford AUX Adapter will NOT work if the RSE (Rear Seat Entertainment) system is present (Must disconnect to use this adapter).
    - Will NOT work if the factory Navigation system is present.
    - Will NOT work if the factory Satellite Radio System is present.
    - Not compatible with Ford SYNC System.
    Adds an 3.5mm audio jack input to select Ford/Lincoln/Mercury factory stereo, let you enjoy more music from mobile phone, iPod/iPhone/iPad, AUX-in Bluetooth adapter, Nintendo Switch,MP3 player, DVD, XM, PSP, PSV, etc. (for iPhone XS Max/XS/XR/X/8/ 8 plus/X/7/7 plus device, you need to use a Lightning to 3.5mm Headphone Jack Adapter before using this adapter)
    AUX Jack Adapter for Ford F150 2004-2008, Ford F250 2005-2009, Ford F350 2005-2009, Ford F550 2005-2009, Ford Edge 2007-2010, Ford Expedition 2007-2009, Ford Explorer 2006-2009, Ford Focus 2005-2007, Ford Freestyle 2005-2007, Ford Fusion 2006-2009, Ford Mustang 2005-2009, Ford Sport Trac 2007-2009, Lincoln Mark LT 2006-2008, Lincoln MKX 2007-2009, Lincoln Navigator 2007-2009, Lincoln Zephyr 2006, Mercury Milan 2006-2009, Mercury Mountaineer 2006-2009
    Gold Plated 3.5mm AUX Input Jack enhance High Digital Sound quality.
    Direct connection with CD sound quality, No signal interfere, No FM modulator or cassette adapter required.
    Connect and play operation. Plug the data connector to the cd changer port, connect BLACK wire to ground and connect Red wire to a constant +12 volt source, then push the aux button on the radio and enjoy it.
    Installation Instructions:
    1. Verify compatibility.
    2. Turn off car engine and remove key from ignition.
    3. Remove radio from car.
    4. Install data cable to the 16 pin CD changer port.
    5. Connect BLACK wire to ground (vehicle chassis).
    6. Connect RED wire to a constant +12 volt source.
    7. Reconnect the radio, turn on car engine & test.
    8. Route kit to glove box or other accessible location. Complete install by re-installing radio.
    Additional Images